|
|
 |
|
 |
 |
Light & heavy
|
|
 |
 |
|
|
We can easily handle constructions up to 20
Tons inside the factory and almost unlimited weight in the outside area so, to
give an idea about our capabilities in this specific field, the only way is to list some
of our most recent jobs as stated in the following table. Obviously, all quality
procedures are based on the product's purpose and relevant to the Customer's requirements.
Not to forget to check out our specials area also, where is
possible find information concerning some other details relevant to special products that
may comply with different point of view of the mechanical construction's concept.
| Example's list
(heavy) |
| Description |
Weight |
| - Aluminium Heat's Oven for automotive engine's
industry |
71.600 Kg. |
 |
| - Welded beams for a river's bridge (section 1550
mm.) |
62.100 Kg. |
|
| - Fireplace tube flanged with cap (height 36 meters) |
55.000 Kg. |
|
| - Mine's transporter tapes system (length 600
meters) |
43.800 Kg. |
|
| - Bending machine's body for cold forging's industry |
57.500 Kg. |
|
| - Frames for drilling-deck power plants |
23.700 Kg. |
|
|
|
With "light products" we usually define
constructions produced with light raw materials so, the biggest difference between this
paragraph and the previous one, as stated in the table below, is the total weight of the
product. Normally all Welding's
process are performed and Non Destructive Tested according to our procedures except when,
for various reasons, is different specified from the Customer.
The delivery's state of those pieces depends on
their purposes and/or Customer's requirements that, often, are as manufactured,
sandblasted and painted, galvanized, packed and so on.
| Example's list
(light) |
| Description |
Weight |
| - Oil tanks for hydraulic machines and others |
550 Kg. |
|
| - Support's pylons for wires, cables and tubes |
780 Kg. |
|
| - Standard cages and to be plastic coated |
980 Kg. |
|
| - Silos with support's frames |
2100 Kg. |
|
| - Bended beams with H - I - U - L profiles |
- |
|
| - Tubes, circular and rectangular cones |
- |
|
|
If You didn't find what You was looking for, feel free to contact us by
e-mail or
by filling the inquiry's
form, we'll be pleased to help You find information also. |
|
| |
|
|
|
